• +1 (415) 818-0845
  • inquiries-usa@perma-batteries.com
Facebook Youtube Linkedin
  • Sigenergy
  • Edison battery
  • Guides
Products — SIGENERGY
SIGENERGY EC ControllerField programmable · 11 kW max · 120/240 VAC split phase Sigen Loading HubSplit phase · load management & backup transfer SigenStor BAT 9.0Stackable battery modules · 9 kWh each Sigen EV DC ChargerBidirectional DC charging · V2H ready View all All-in-one systems
Resources
Operation manualsUser & installer manuals, firmware notes Certificates & listingsUL, NEC compliance, spec sheets How to installStep-by-step guides, commissioning, app setup Schematics & wiringSingle-line diagrams, grid-tied & off-grid

Browse all resources

Not sure what size you need?

Size your off-grid SIGENERGY system in 2 minutes based on your loads, location and sun hours.

Off-grid solar simulator
Victron + Edison bundles
Edison 12V kit— Victron Edison 24V kit— Victron Edison 48V kit— Victron
Sol-Ark + Edison bundles
Edison 48V kit— Sol-Ark
Bare batteries
Edison batteries— cells & packs, no inverter
Documentation
Datasheet & specifications Installation manual Maintenance & electrolyte Charge settings (Victron / Sol-Ark) Warranty & certifications

Which Edison battery for your project? Our simulator guides you based on your loads, your site and your budget.

Solar simulator
Solar batteries
Battery chemistries compared— LFP, NiFe, LTO How to size an off-grid battery bank Lifespan & cycle life BMS & pack safety Off-grid solar 101
Wiki & documentation
SIGENERGY— EC Controller, SigenStor Edison batteries Sol-Ark Victron
Inverters
Off-grid vs hybrid inverter MPPT, how it works AC vs DC coupling Split phase 120/240 V explained Generator backup & auto-start
Codes & regulations
Where can I install my batteries? NEC for stand-alone systems— Art. 690, 706, 710 UL 9540 / 9540A, what it means Permits & inspections (AHJ) 30% federal tax credit (ITC)— off-grid eligible Canada: CSA & CEC basics

Not sure where to start? Our technical guides break down every choice, spec sheet in hand.

All guides Solar simulator
$0.00 0 Cart
Need a quote ?
SIGENERGY EC SP
SIGENERGY Sigenstor EC SP
October 21, 2026
sigenstor EVDC
SIGENERGY Sigen EVDC
October 21, 2026
sigenstor BAT 9 US

SIGENERGY Sigenstor BAT

$2,280.00 – $2,850.00Price range: $2,280.00 through $2,850.00

Stackable LiFePO₄ battery module

SigenStor BAT 6.0 US · BAT 9.0 US
SIGENERGY battery for the SigenStor EC SP US · 6.02 or 9.04 kWh per module · up to 54 kWh · sold per module
🔋5.84 / 8.76 kWh usable
BAT 6.0 US · BAT 9.0 US
⚡3.0 / 4.6 kW continuous
4.5 / 6.9 kW peak for 10 s
📦Stack up to 6 modules
54.24 kWh per controller
🔀Mix 6.0 + 9.0, new and old
DC-DC optimizer in every module
🔌Plug-in expansion
self-guiding connectors, no cables
🧪LiFePO₄ · multi-layer protection
UL 1973 · UL 9540 · UL 9540A
🌡️Type 4X outdoor · -4 to 131 °F
natural convection, silent
📱mySigen app
live battery status per module
📏Same footprint 30.2 × 10.6 × 10.4 in
137 lb (6.0) · 172 lb (9.0)
Need a system design? →
Clear
SKU: N/A Category: Sigenergy
Share
0
  • Description
  • Additional information
  • Reviews 0

SigenStor BAT 6.0 and 9.0 US: the stackable SIGENERGY battery, 5.84 to 52.6 kWh usable

LiFePO₄ modules · 6.02 or 9.04 kWh · 3.0 / 4.6 kW continuous · built-in DC-DC optimizer · mix 6.0 and 9.0 freely · up to 6 modules per controller · Type 4X

LiFePO₄5.84 / 8.76 kWh usable4.6 kW · 6.9 kW peakStack up to 6Mix 6.0 + 9.0Type 4X outdoorUL 9540 · UL 9540A
sigenstor BAT
🔋Sold per module, two capacities.
Choose BAT 6.0 US (part no. 11130020) or BAT 9.0 US (part no. 11130019). Both fit the same SigenStor stack, and the built-in DC-DC optimizer lets you mix sizes and ages. Ships by freight truck only.
Datasheet
User manual

The SigenStor BAT at a glance

ModelsSigenStor BAT 6.0 US (11130020) · SigenStor BAT 9.0 US (11130019)
Chemistrylithium iron phosphate (LiFePO₄)
Total / usable energy6.02 / 5.84 kWh · 9.04 / 8.76 kWh
Continuous charge / discharge3,000 W (6.0) · 4,600 W (9.0)
Peak power (10 s)4,500 W (6.0) · 6,900 W (9.0)
Stack1 to 6 modules per SigenStor EC SP US · up to 54.24 kWh total, 52.6 kWh usable
Optimizerbuilt-in DC-DC per module · mix 6.0 and 9.0, new and old
EnclosureType 4X · natural convection · floor-standing or wall-mounted
Dimensions30.2 × 10.6 × 10.4 in (767 × 270 × 265 mm), both models
Weight136.7 lb (62 kg) · 172.0 lb (78 kg)
Operating temperature-4 to 131 °F (-20 to 55 °C)
CertificationsUL 1973 · UL 1998 · UL 9540 · UL 9540A · UN 38.3 · FCC Part 15 Class B

The SigenStor BAT is the battery module of the SigenStor home energy system, the SIGENERGY battery that stacks under the EC SP controller. First, it comes in two sizes: 6.02 kWh and 9.04 kWh, with 5.84 and 8.76 kWh usable. Then, each module carries its own DC-DC optimizer. A 6.0 and a 9.0, or an old module and a new one, share the same stack without derating. Moreover, up to six modules stack under one controller, for 54.24 kWh. Finally, the Type 4X enclosure and natural convection make the stack fit for outdoor installation. There is no fan to fail.

“The optimizer per module is the feature people underestimate. On most systems, adding a battery three years later means the old pack drags the new one down. With the SigenStor BAT, each module runs its own DC-DC stage, so a customer can start with two 6.0 modules and add a 9.0 when the EV arrives. That is the only residential battery I know of where expansion is truly plug-and-play.”
— Julien, Perma Batteries

SigenStor BAT 6.0 vs 9.0: same footprint, two capacities

Both modules share the same 30.2 × 10.6 × 10.4 in enclosure, so the stack looks identical whatever the mix. First, the BAT 6.0 US stores 6.02 kWh, with 5.84 kWh usable and 3.0 kW of continuous power. Then, the BAT 9.0 US stores 9.04 kWh, with 8.76 kWh usable and 4.6 kW. Moreover, both surge to 1.5 times their continuous rating for 10 seconds. The price per kWh favors the 9.0, but the 6.0 keeps the entry ticket lower and the lifting weight under 140 lb. Consequently, most installs start with 9.0 modules and keep the 6.0 for the odd extra kilowatt-hour.

ParameterSigenStor BAT 6.0 USSigenStor BAT 9.0 US
Part number1113002011130019
Total energy6.02 kWh9.04 kWh
Usable energy5.84 kWh8.76 kWh
Max. charge / discharge power3,000 W4,600 W
Peak power, 10 s4,500 W6,900 W
Weight136.7 lb (62 kg)172.0 lb (78 kg)
Dimensions (W × H × D)30.2 × 10.6 × 10.4 in30.2 × 10.6 × 10.4 in

💡 What it means for you

Power scales with the number of modules, not just energy. Two BAT 9.0 give 9.2 kW of battery power, three give 13.8 kW, which is what the 11.5 kW EC SP needs to deliver full backup at night. One module alone will cap backup at 4.6 kW.

Stack up to six SigenStor BAT modules: 54 kWh per controller

The stack is the heart of the SigenStor design. First, modules plug into each other through self-guiding connectors, with no DC cables or busbars to make up. Then, the EC SP US controller sits on top and sees the whole stack on its 300 to 600 V battery bus. Moreover, you can add a module at any time: the new one plugs into the existing tower and the optimizers balance the mix. Finally, six modules of 9.04 kWh total 54.24 kWh, enough for two days of autonomy in a typical off-grid home.

ModulesEnergy (all 9.0)UsableBattery powerTypical use
1 × BAT 9.09.04 kWh8.76 kWh4.6 kWself-consumption, time-of-use
2 × BAT 9.018.08 kWh17.52 kWh9.2 kWpartial-home backup
3 × BAT 9.027.12 kWh26.28 kWh13.8 kWwhole-home backup, full EC SP power
4 × BAT 9.036.16 kWh35.04 kWh18.4 kWbackup + EV charging
6 × BAT 9.054.24 kWh52.56 kWh27.6 kWoff-grid, two days of autonomy

⚡ The Perma Batteries tip

Battery power above the controller rating is not wasted: it covers the 17.1 kW peak of the EC SP for motor starts and charges faster from 23 kW of PV. But past three BAT 9.0, you are buying energy, not power. Size the count on autonomy.
SIGENSTOR BAT

Built-in DC-DC optimizer: mix new and old, 6.0 and 9.0

Every SigenStor BAT module embeds a DC-DC converter between its cells and the stack bus. First, that converter sets each module’s current independently, so a 6.0 and a 9.0 deliver their own share of power. Then, it keeps an older module from limiting the newer ones. Moreover, it isolates a faulty module without taking the stack down. As a result, Sigenergy allows mixing capacities and generations in one tower. Most competitors forbid it. Finally, the optimizer runs the AI-assisted cycle management that Sigenergy claims extends cycle life.

✅ Advantage: expansion without penalty

Start with what the budget allows and add modules as the household grows: a heat pump, an EV, a pool. No matching of batches, no replacement of the first modules, no second inverter.

Safety: LiFePO₄, UL 9540 and multi-layer protection

Lithium iron phosphate is the stable end of the lithium family, with no oxygen release in thermal runaway. On top of the chemistry, Sigenergy layers protection at cell, module and system level. First, the module is listed to UL 1973 and the complete SigenStor system to UL 9540. UL 9540A covers fire propagation testing. Then, UL 1998 covers the software in the BMS. Moreover, UN 38.3 certifies transport. Finally, the Type 4X enclosure keeps water, dust and corrosion out. That is why the stack can live outside without a shelter.

StandardScopeWhy it matters
UL 1973battery modulerequired for any stationary lithium battery in the US
UL 9540complete energy storage systemwhat the AHJ asks for under NEC 706 and the fire code
UL 9540Athermal runaway propagation testallows reduced spacing and indoor installation per fire code
UL 1998software in programmable componentsBMS firmware safety
UN 38.3transportfreight shipping of lithium batteries
FCC Part 15 Class BEMIresidential-grade emissions

Powered By EmbedPress

Installation: floor-standing or wall-mounted, Type 4X, no fan

The SigenStor BAT installs as a floor-standing tower or wall-mounted, indoors or out. First, each module measures 30.2 in wide, 10.6 in high and 10.4 in deep. A six-module tower with the controller stands about 75 in tall. Then, the 172 lb weight of a BAT 9.0 calls for a two-person lift or a lifting aid. Moreover, natural convection cooling means silent operation and no filter to clean. Finally, the operating range runs from -4 to 131 °F, and storage from -13 to 140 °F.

Dimensions per module (W × H × D)30.2 × 10.6 × 10.4 in · 767 × 270 × 265 mm
Weight136.7 lb (6.0) · 172.0 lb (9.0)
Installationfloor-standing or wall-mounted
EnclosureType 4X
Coolingnatural convection, silent
Operating temperature-4 to 131 °F · -20 to 55 °C
Storage temperature-13 to 140 °F · -25 to 60 °C
Relative humidity5 to 95 %
Max. altitude13,123 ft · 4,000 m
Shippingfreight truck only

⚠️ Cold-weather note

Charging stops below -4 °F (-20 °C) and lithium cells charge slowly near that limit. In northern states, keep the tower out of direct wind or in a garage. Unlike some competitors, the SigenStor BAT has no self-heating pad, so the controller simply waits for the cells to warm up.

Which SigenStor BAT configuration do you need?

ScenarioModulesUsable energyController settingAdd-ons
Time-of-use arbitrage1 × BAT 9.08.76 kWh5.7 to 7.6 kWnone
Partial-home backup2 × BAT 9.017.5 kWh7.6 to 9.6 kWLoadHub
Whole-home backup3 × BAT 9.026.3 kWh11.5 kWLoadHub + generator
Backup + EV4 × BAT 9.035.0 kWh11.5 kWLoadHub + Sigen EV DC
Off-grid home6 × BAT 9.052.6 kWh11.5 kWLoadHub + generator

Count the kilowatt-hours you want to carry overnight, then add one day of margin for an off-grid site. Because the modules mix freely, you can start with a BAT 6.0 and add 9.0 units later.

SigenStor BAT datasheet

ModelsSigenStor BAT 6.0 US (11130020) · SigenStor BAT 9.0 US (11130019)
Battery typeLiFePO₄
Total energy capacity6.02 kWh · 9.04 kWh
Usable energy capacity5.84 kWh · 8.76 kWh (100 % DoD, 0.2C, 77 °F, beginning of life)
Max. charge / discharge power3,000 W · 4,600 W
Peak charge / discharge power (10 s)4,500 W · 6,900 W
Modules per controllerup to 6 · max. 54.24 kWh
Optimizerbuilt-in DC-DC per module · mixed capacities supported
Weight136.7 lb (62 kg) · 172.0 lb (78 kg)
Dimensions (W × H × D)30.2 × 10.6 × 10.4 in · 767 × 270 × 265 mm
Storage temperature-13 to 140 °F · -25 to 60 °C
Operating temperature-4 to 131 °F · -20 to 55 °C
Relative humidity5 to 95 %
Max. operating altitude13,123 ft · 4,000 m
Coolingnatural convection
System enclosure typeType 4X
Installationfloor-standing · wall-mounted
Compatible controllerSigenStor EC SP US · 300 to 600 V battery bus
StandardsUL 1973 · UL 1998 · UL 9540 · UL 9540A · UN 38.3 · CP 65 · FCC Part 15 Class B
Shippingfreight truck only

FAQ — SigenStor BAT

What is the SigenStor BAT?
It is the LiFePO₄ battery module of the SigenStor home energy system by Sigenergy. It comes as BAT 6.0 US (6.02 kWh) or BAT 9.0 US (9.04 kWh) and stacks under the SigenStor EC SP US controller, up to six modules.
What is the difference between SigenStor BAT 6.0 and 9.0?
Capacity and power. The 6.0 stores 5.84 kWh usable and delivers 3.0 kW; the 9.0 stores 8.76 kWh usable and delivers 4.6 kW. Dimensions are identical; the 9.0 weighs 35 lb more.
Can I mix 6.0 and 9.0 modules in one stack?
Yes. Each module has a built-in DC-DC optimizer, so capacities and generations mix freely in the same tower without derating.
How many SigenStor BAT modules fit under one controller?
Up to six, for 54.24 kWh total and 52.6 kWh usable with BAT 9.0 modules. Larger systems use several controllers, each with its own stack.
Can I expand the battery later?
Yes. A new module plugs into the existing tower through the self-guiding connectors, and the optimizers balance it with the older modules. No rewiring, no second inverter.
Is the SigenStor BAT rated for outdoor installation?
Yes. The Type 4X enclosure handles rain, dust and corrosion, and natural convection cooling has no fan to fail. The operating range is -4 to 131 °F.
Does the SIGENERGY battery provide backup during an outage?
Yes, with the SigenStor EC SP US controller and, for 0 ms switchover, the Sigen LoadHub. Backup power equals the sum of the modules' ratings, capped by the controller setting.
Which certifications does it carry?
UL 1973 for the module, UL 9540 and UL 9540A for the system, UL 1998 for the BMS software, UN 38.3 for transport and FCC Part 15 Class B.

Powered By EmbedPress

Powered By EmbedPress

Version

6.0, 9.0

Reviews

There are no reviews yet.

Be the first to review “SIGENERGY Sigenstor BAT” Cancel reply

Your email address will not be published. Required fields are marked *

Related products

  • sigenstor EVDC

    SIGENERGY Sigen EVDC

    $2,850.00
  • SIGENERGY EC SP

    SIGENERGY Sigenstor EC SP

    $2,499.00
  • SIGENERGY LOADHUB

    SIGENERGY LoadHub

    $1,599.00